We – EPG Team the bigge EPT Chain and agricultural gearbox factory in China with 5 diverse branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
2571 Stepper Motor Electrical DC Motor for 3D Printer
PG36M555 Sequence
voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Velocity variety: 3000-9500rpm
power: 3.3-13w
Common purposes: Central air-conditioning valve, Amusement gear, Coin
Refund units, Grill, Oven, Peristaltic pumps, ATM lender
Automatic technique, Robot, Medical products, Workplace
Products, Home appliances, Automated actuator.
Excess weight: 320~400g/PCS(approx)
Packing information: CTN size: 32X28XH26cm 40PCS/CTN G. W. 16Kgs
| Gearbox data: |
| |
| Number of phases |
1stages reduction |
two stages reduction |
3 phases reduction |
four levels reduction |
5 phases reduction |
| Reduction ratio |
3.75.2 |
13.719.226.nine |
50.971.299.5139 |
188264369516721 |
6699771367191126723736 |
| gearbox duration ” L” mm |
26.four |
32.six |
38.nine |
45.3 |
52.five |
| Max.Managing torque |
three.0Kgf @ cm |
six.0Kgf @ cm |
8.0Kgf @ cm |
twelve.0Kgf @ cm |
20Kgf @ cm |
| Max. Equipment breaking torque |
9.0Kgf @ cm |
18.0Kgf @ cm |
24Kgf @ cm |
36Kgf @ cm |
60Kgf @ cm |
| Max. Gearing performance |
90% |
81% |
seventy three% |
sixty five% |
fifty nine% |
|
|
| Motor info: |
| |
| Motor name |
Rated volt.v |
No load |
Load torque |
Stall torque |
| Present |
Velocity |
Current |
Velocity |
Torque |
Output electricity |
Torque |
Existing |
| mA |
r/min |
mA |
r/min |
gf @ cm |
W |
gf @ cm |
mA |
| RS-555123000 |
12 |
≤140 |
3000 |
≤800 |
2200 |
one hundred fifty |
3.three |
600 |
3000 |
| RS-555124500 |
twelve |
≤220 |
4500 |
≤1200 |
3300 |
220 |
seven.two |
880 |
7800 |
| RS-555126000 |
twelve |
≤350 |
6000 |
≤2000 |
4500 |
three hundred |
13.5 |
1200 |
6000 |
| RS-555243000 |
24 |
≤70 |
3000 |
≤400 |
2200 |
a hundred and fifty |
3.three |
600 |
1600 |
| RS-555244500 |
24 |
≤110 |
4500 |
≤600 |
3300 |
220 |
seven.2 |
880 |
3000 |
| RS-555246000 |
24 |
≤180 |
6000 |
≤1000 |
4500 |
three hundred |
thirteen.five |
1200 |
4000 |
1This desk lists some motors parameters, other folks you should refer to specific parameters of rs-555.htm”
2Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiencyoutput pace:motor speed / reduction ratio. |
|
|
| NOTE: |
1 Gearmotor named techniques: e . g . SG-555123000-99.5K Motor you should refer to the motor knowledge RS-555123000.
Gearbox make sure you refer to gearbox knowledge reduction ratio99.5 .Related to gearmotor output speed and torque please
refer to motor information.
2 Motor can be set up wiht magnetic encorder. encorder parameters you should refer to me-37.htm .
3Standard output shaft soon after minimizing: 8.0mm. EPT measurements of then output shaft can make as consumer request.
4Chart only for reference,items shall prevail the entity. |
|
Organization Introduction
The use of original products manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the shown alternative components contained herein are not sponsored, accredited, or produced by the OEM.
